Samick SinoArt 25" ILF Bow Riser Aluminum CNC Milling Right Hand Fit ILF Limbs (Red)

Brand: Samick

Color: Red

Features:

• 25 inch ILF Recurve Bow Riser Including Limb Bolts For Right Handed Shooter
• Body Material - CNC Machining bow riser with high accuracy. Machined Anodized Aluminium Alloy 6061-T6
• Secial Aligment System - To prevent the screw loosening and to fit the Limbs degree angle,protecting the limbs connection part with better stabilization and better looking.
• Recommend draw draw length 25"-30",max draw length 30",the draw weight is measured with 28"
• Easy to Assemble and Disassemble - ILF Riser fits for all ILF limbs. Please keep in mind that using a stringer tool is the most safely way to properly take down and put together the recurve bow.

Publisher: Samick

Details: Specification
ILF Riser Length: 25 inch
Fit: Right Handed Shooter
Color: Black/Purple/Bule/Red
Features: CNC machining ,ILF device
The Handle Material: aluminum alloy 6061-T6


Introduction: Riser and limb fitting
In order to properly assemble the limbs with the riser, you will need to push the lLF detent part from the limb into the appropriately sized slot on the riser until you hear a click.

Brace height
Brace height is the horizontal distance between the grip and the bowstring Changingthe brace height does not affect the drawweight but can significantly affect bow perfor-mance.A higher brace height will decrease velocity while a lower brace height will increasevelocity.

Tiller and draw weight adjustability
To adjust the tller and bow weight, firstly, you need to loosen the weight tiller locking bolt with the Allen key. Use the Allen key to turn the weight tiller adjustment bolt clockwise to increase bow weight and counter clockwise to decrease bow weight. When the correct poundage is set, tighten the locking bolt located at back of theriser. It is best to adjust the tiller and weight while the bow is unstrung. When adjusting the tller and bowweight, do not exceed the recommended turns out from the maximum position.Maximum opening: 4 complete turns starting from closed position.

Limb / riser alignment
Before adjusting the alignment of the riser, first check the center string position towards the riser. You can adjust the centershot without unstringing your bow.
1. Unscrew both locking screws
2. To adjust limb position to the left, loosen the inner left side bolt and tighten the right sided one till the limb is centered.
3. Once the limb is centered, retighten the left side bolt
4. Fasten both locking screws

Package Including:
1 X Riser,
3 X Allen Keys,

UPC: 885024249662

EAN: 885024249662

Package Dimensions: 28.2 x 5.6 x 2.7 inches